CALL US

Addressable Monitor Module IDP-MONITOR

blog

Gallery Images

blog

Addressable Monitor Module IDP-MONITOR

The IDP-MONITOR is an addressable monitor module for use with the Honeywell Farenhyt Series fire alarm control panels (FACPs). The IDP MONITOR acts as an interface to contact devices, such as waterflow switches and pull stations. The IDP-MONITOR supports Class A supervised or Class B supervised wiring to the load device. Conventional 4-wire smoke detectors can be monitored for alarm and trouble conditions.
Contact Now Contact Now
  • Isolates short circuits on an SLC loop
  • Protects the modules on the SLC loop so other devices continue to operate
  • Panel controlled status LED that flashes green in normal state and is solid red in alarm
  • Standard 4 inch electrical box mounting
  • SEMS screws for easy wiring
  • UL Listed
  • CSFM Listed
  • MEA Listed 427-91-E Vol. X
Manual Manual

ELECTRICAL RATINGS

  • Operating Voltage: 15 – 32VDC
  • Current Draw (LED on): 5.0mA max
  • Operating Current (LED flashing): 375μA
  • Standby Current: 400 μA max @ 24 VDC (one
    communication every 5 sec with 47K EOL); 550 μA
    max @ 24 VDC (one communication every 5 sec
    with EOL <1K)
    5.5 mA (with LED latched on)
  • LED Current: 5.5 mA (with LED latched on)
  • End-of-Line Resistance: 47K W
    Initiating Device Circuit Wiring Resistance: 1,500
    W max
  • SLC Loop Resistance: 40 W max.

ELECTRICAL

  • Operating Temperature: 32º-120ºF (0ºC – 49ºC)
  • Humidity: 10 to 93% non-condensing)

ORDERING INFORMATION

  • IDP-MONITOR: Monitoring Module

ACCESSORIES

  • SMB500: 4” Square surface mount electrical box

Related Products

No Project Found