CALL US

Addressable Single Action and Dual Action Pull Stations IDP-PULL-SA / IDP-PULL-DA

blog

Gallery Images

blog

Addressable Single Action and Dual Action Pull Stations IDP-PULL-SA / IDP-PULL-DA

The IDP-PULL-SA is a single action pull station requiring only one motion to activate the station. The IDP-PULL-DA is a dual action pull station requiring two motions to active the station. Both pull stations are designed to work with Honeywell Farenhyt series fire alarm control panels (FACPs).
Contact Now Contact Now
  • Installer can open station without causing an alarm condition
  • Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition
  • Key operated test and reset lock using lock plate actuator
  • Key matches compatible FACP locks
  • Meets ADA requirement for 5 lbs maximum pull force to active
  • Reliable analog communications for trouble-free operation
  • Braille text on station handle
  • Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13])
  • Shell, door, and handle molded from durable LEXAN®
  • Rotary address switches for fast installation
  • Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled
  • UL Listed, including
  • UL 38, Standard of Manually Actuated Signaling System
  • CSFM Listed
  • MEA Listed
Manual Manual

SPECIFICATIONS*

  • Physical: 5.5″ H x 4″ D ( 14cm x 10.2cm)
  • Shipping Weight: 5.4oz
  • Housing Material: LEXAN polycarbonate resin
  • Bi-Colored LED:
  • Blinking Green: Normal
  • Steady Red: Alarm
  • Switch: Single pole, single throw (SPST) normally
    open (N/O) switch which closes upon activation of
    the pull station

ELECTRICAL RATINGS

  • Operating Voltage: 15 – 32VDC
  • SLC Standby and Alarm Current: 350μA
    Wire Gauge: Up to 12AWG (3.1 mm2)

ENVIRONMENTAL

  • Operating Temperature: 32º-120ºF (0ºC – 49ºC)
  • Humidity: 10 to 93% non-condensing)

ORDERING INFORMATION

  • IDP-Pull-SA: Single Action Pull Station
  • IDP-Pull-DA: Dual Action Pull Station

ACCESSORIES

  • BG-TR: Optional trim ring.
  • SB-I/O: Surface backbox, indoor/outdoor.
    * Unless otherwise noted, specifications apply to
    IDP-Pull-SA and IDP-Pull-DA

Related Products

No Project Found