Glyptic

Combination Sensing:
- It’s a multi-sensor detector, meaning it combines both photoelectric smoke detection and thermal (heat) detection. This allows it to respond to a wider range of fire types.
- Photoelectric sensing is effective for detecting smoldering fires, while the thermal sensor reacts to rapid temperature increases.
Addressable-Analog Communication:
- It’s an addressable device, which means each detector has a unique address. This allows the fire alarm control panel to pinpoint the exact location of a fire.
- It uses analog communication to transmit information about smoke density and temperature to the control panel.
Design and Aesthetics:
- It features a sleek, low-profile design, intended to be aesthetically pleasing.
- It’s typically available in white.
Key Features:
- Rotary address switches for easy addressing.
- Dual LEDs for 360° visibility.
- Low standby current.
- It is designed to meet UL268 7th Edition standards.
Applications:
- Primarily used in commercial and industrial fire alarm systems.

Key Technical Specifications:

Operating Voltage Range:
- 15 to 32 VDC
Operating Current @ 24 VDC:
- 200 uA (one communication every 5 seconds with green LED blink on communication)
Maximum Alarm Current:
- 2 mA @ 24 VDC (one communication every 5 seconds with red LED solid on)
Maximum Current:
- 4.5 mA @ 24 VDC
Thermal Ratings:
- Fixed temperature setpoint 135°F (57°C)
Size:
- Height: 2.0˝ (51 mm) installed in B300-6 Base
- Diameter: 6.2˝ (156 mm) installed in B300-6 Base; 4.1˝ (104 mm) installed in B501 Base
Weight:
- 3.4 oz. (95 g)
Velocity Range:
- UL/ULC Listed Velocity Range: 0-4000 ft/min. (1219.2 m/min.)
Relative Humidity:
- 10%-93% noncondensing.
Sensitivity:
- UL Applications: 0.5% to 4.0% per foot obscuration.
- ULC Applications: 0.5% to 3.5% per foot obscuration.
Temperature ranges:
- FSP-951T, 0°C to 38°C (32°F to 100°F).

Additional Important Features:

Addressable-Analog Communication:
- Allows precise location identification.
Combination Photoelectric and Thermal Sensing:
- Enhanced fire detection capabilities.
Rotary Address Switches:
- For easy addressing.
Dual LEDs:
- For 360° visibility.
Compatibility:
- Compatible with FlashScan® and CLIP protocol systems.
Compliance:
- Designed to meet UL268 7th Edition.

UL/ULC Listed:
- This signifies that the device has been tested and certified by Underwriters Laboratories (UL) and Underwriters Laboratories of Canada (ULC). These are prominent safety certification organizations.
- Specifically relating to UL 268 which is the standard for smoke detectors for fire alarm systems. And also UL 521 which is the standard for heat detectors.
FM Approved:
- This indicates that the device has been approved by FM Approvals, which is a testing and certification organization that focuses on property loss prevention.
CSFM:
- This refers to certification by the California State Fire Marshal. This certification is important for products installed in California.

These certifications assure that the Notifier FSP-951T meets stringent requirements for fire detection and safety.

No Project Found